Codes + Standards

A proposed guideline that will establish a uniform procedure for transmitting design, construction, testing and operational information to building owners and operators is open for public comment. ASHRAE Standard 202P, Commissioning Process for Buildings and Systems and other ASHRAE guidelines on commissioning require development of a systems manual, as do several other standards and energy- [...]

The National Electrical Manufacturers Association (NEMA) has published ANSI C136.20, American National Standard for Roadway and Area Lighting—Fiber-Reinforced Composite (FRC) Lighting Poles. This standard applies to fiber-reinforced composite (FRC) lighting poles used for roadway and area lighting. It includes nomenclature, dimensional data, performance criteria and some interchangeability features for standard poles as well as those [...]

The Illuminating Engineering Society of North America (IES) recently announced publication of IES Approved Method for Photometry of Reflector Type Lamps (LM-20-13), the latest in a continuing series of Lighting Measurement Testing & Calculation Guides. This method describes photometric testing procedures and reporting guidelines for reflector-type lamps. It is intended that these procedures and guidelines [...]

The California Energy Commission (CEC) has published a voluntary quality specification for omnidirectional and directional LED replacement lamps intended to replace screwbase incandescent lamps in light fixtures other than colored lamps, light strips and rope lights, linear pin-based lamps and integrated light fixtures. Research conducted by the California Lighting Technology Center resulted in two conclusions. [...]

Building energy codes offer an attractive energy savings opportunity for utility efficiency programs, particularly now that there are new approaches to quantify the savings from code compliance efforts, according to Building Energy Code Advancement through Utility Support and Engagement, a report issued by the American Council for an Energy-Efficient Economy (ACEEE). The report recommends ways [...]

The National Electrical Manufacturers Association (NEMA) has published ANSI ANSLG C38.377 Specifications for the Chromaticity of Solid State Lighting Products. This publication specifies the range of chromaticities recommended for general lighting with solid state lighting (SSL) products and advises customers of their white light chromaticities. This vital information applies to chromaticity standards and definitions and [...]

Below is an article I wrote about Zhaga, originally published in the October 2012 issue of TED: In a traditional light fixture, lamps, auxiliary components such as ballasts, and the fixture itself connect using standard interfaces, providing three key benefits. Manufacturers can specialize in what they do best—lamp, ballast/transformer or fixture design, facilitating product development. [...]

The National Electrical Manufacturers Association (NEMA) recently published ANSI C136.1 American National Standard for Roadway and Area Lighting Equipment—Filament Lamps—A Guide for Selection, available for purchase here in hard copy or electronic format for $36. This is a guide for the proper selection of filament lamps for use in roadway and area lighting equipment. C136.1-2012 [...]

Lighting requirements to enhance productivity and comfort of occupants have been proposed for a green building standard from ASHRAE, the U.S. Green Building Council (USGBC) and the Illuminating Engineering Society (IES). ANSI/ASHRAE/USGBC/IES Standard 189.1-2011, Standard for the Design of High-Performance, Green Buildings Except Low-Rise Residential Buildings, provides a design standard for those who strive for [...]