
USAI Lighting’s new Connect LV+ Centralized Power System moves power conversion away from individual architectural luminaires, targeting installation labor, above-ceiling congestion and service access. Introduced last week, the system supports existing USAI fixture families through a low-voltage architecture. USAI’s project modeling estimates savings of 15–33% across fixtures, labor and installation—a potentially significant reduction, although the figures are manufacturer estimates rather than independently verified project results.
Separating The Power Supply From The Fixture
The platform pairs two USAI-engineered components: a remotely mounted Centralized Power Unit supplying constant, low-voltage power and a compact Fixture Control Module at each luminaire (see image above). The module manages wattage and provides polarity protection. By separating these functions from a conventional integral-driver arrangement, USAI aims to simplify fixture connections while reducing hardware and space requirements. The company says fixtures can be installed, changed and serviced without rewiring.
For contractors, the installation-time claim is notable: approximately two minutes per fixture connection, compared with roughly 10 minutes for a traditional driver-and-junction-box installation. That comparison focusses on the fixture connection, not the entire installation, but it identifies where USAI expects meaningful labor savings. Polarity-protected circuitry also addresses a potential wiring-error point. Remote power placement targets maintenance challenges associated with high ceilings and difficult-to-access locations, including atriums and retail spaces.
Longer Runs and Independent Dimming
Connect LV+ supports low-voltage wire runs up to 200 feet, which USAI describes as twice the standard power-supply-to-fixture distance limit. The company also specifies up to 28 fixtures per string. These capabilities are central to its argument for fewer power supplies, less wiring and reduced space devoted to power equipment. Actual layouts will still require attention to the selected luminaires and available power-unit capacity.
Each power unit offers up to four independently dimmable zones, allowing separate control from shared power infrastructure. USAI specifies dimming to 0.5%, described as smooth and flicker-free, while maintaining fixture-to-fixture dimming consistency. For architectural applications, the combination is significant: centralized power distribution is intended to retain low-end dimming performance and zoning flexibility rather than trade those attributes for simpler installation.
The system also supports mixed wattages and fixture families on one power supply, with no manual balancing required, according to USAI. That flexibility could simplify specifications incorporating different luminaire types or output requirements. Centralized Power Units are available in 50W, 90W and 180W sizes, and an optional spare power pack is offered for use in the event of a power-unit failure.
Familiar Fixtures, Different Infrastructure
At launch, compatible families include LittleOnes Micro, LittleTwos NXT, LittleTwos Cylinder, Small in One–Mini and USAI Zero. USAI says these products retain their existing performance and full feature sets, positioning Connect LV+ as another powering option alongside integral and remote configurations—not a separate, reduced-feature fixture range.
The announcement’s strongest value proposition is therefore infrastructure efficiency: fewer distributed power components, faster connections, longer runs and centralized service access, coupled with architectural dimming capability. USAI also claims reduced energy use, but provides no quantified efficiency data in their press release. Project-specific economics and electrical performance will consequently remain important specification-stage checks.
More information is available here.
All images courtesy of USAI Lighting.









![2610_LightNow_Archlight_Banner Ad_900x400 | LightNOW Dallas Market Center ArcLight Summit banner: Call for Speakers, June 22–23, 2027 — Apply Now (logo with colorful arc.”] ,](https://i0.wp.com/www.lightnowblog.com/wp-content/uploads/2026/10/2610_LightNow_Archlight_Banner-Ad_900x400-e1792264459229.png?fit=900%2C400&ssl=1)


You must be logged in to post a comment.